HCN5系列内燃机喷油器雾化检测 汽油泵试验台；
技术参数：
1.量筒：45ml及150ml各一套（每套12支）
2.燃油箱容积：60L；
3.油温自动控制：40±2℃；
4.试验油滤油精度：5μ；
5.直流电压12V和24V；
6.供油压力：低压：0~0.4Mpa，高压：0~4Mpa;
7.泵体内压显示：0~0.16Mpa；
8.气压显示：0~0.3Mpa
9.转速预置：0~4000RPM可任意预置；
10.左右两边均可调速
11.中心高：125MM；
12.飞轮惯量：0.8KG.M
设备含包装箱长220宽103 高167cm 重量约1050KG
12PSB series injection pump test bench:
Host frequency control, the speed can be preset, digital table display speed, count, oil temperature, gear.
Introduction of Functions and features:
01. Test the oil supply of each cylinder at different speeds
02. Static check the time of oil supply of each cylinder
03. Can control the operation of the equipment from the left and right sides, convenient for users to operate.
04. VE distribution pump solenoid valve test
05. The test bench speed count can be preset
06. Check the performance of the boost compensator
07. Check the transmission and supply capacity of the distribution pump
08. Measure the internal pressure of the distribution pump
09. Equipment speed can be set as required (0-4000 RPM)
10. Test the tightness of the injection pump.
11. Main motor power of the equipment: 18.5KW
12. Including the outer packing box size: length 220cm wide 102cm high 166cm
13. It weighs about 1050KG
14Power supply: three-phase 380V-400V 50/60HZ
Main technical parameters:
1. Measuring cylinder: 45ml and 150ml each (each set of 12)
2. Fuel tank capacity: 60L;
3. Oil temperature automatic control: 40±2℃;
4. Test oil filtration accuracy: 5μ.
5. Dc voltage 12V and 24V;
6. Oil supply pressure: low pressure: 0~0.4Mpa, high pressure: 0~4Mpa;
7. Pressure display inside the pump: 0~0.16Mpa;
8. Pressure display: 0~0.3Mpa
9. Speed preset: 0~4000RPM can be preset arbitrarily;
10. Speed can be adjusted on both sides
11. Center height: 125MM;
12. Inertia of flywheel: 0.8KG.M
